SEG.50.40.EX.2.50B
The Grundfos SEG grinding pump is a non-self-priming single-stage centrifugal pump with a horizontal discharge port, specifically designed for pumping wastewater containing toilet discharges. The pump is equipped with a grinding system that can grind destructible solids into small pieces, allowing them to flow away through relatively small-diameter pipes.
The SEG grinding pump is highly suitable for use in densely populated areas where a gravity sewage system is not feasible. For example, in villages, farmlands, and regions with significant topographical height differences, the pressurized system can offer advantages. There are two types of installations for the pump:
Submersible installation within the automatic coupling system
Submersible installation, independent type.
The pump is made of wear-resistant materials such as cast iron and stainless steel. These materials ensure reliable operation. The surface of the pump is smooth to prevent dirt and impurities from adhering. Corrosion-resistant stainless steel clamps fix the motor to the pump casing, facilitating the maintenance of the pump. The SmartTrim system enables easy adjustment of the impeller clearance, ensuring the highest efficiency throughout the service life of the pump.
This series is designed to reduce energy consumption, minimize the cost of downtime, and maintain optimal performance throughout the entire life cycle of the system. The pump is an explosion-proof pump.
|
Submersible sewage pump
SEG.50.40.EX.2.50B
Number: 99274389
Suitable for
- Commercial sewage treatment
- Domestic sewage treatment
- Sewage transportation
- Flood control and drainage
Grinding pump
|
 |
Controller:
Humidity Sensor: No humidity sensor
AUTOADAPT: No
Liquid:
Liquid Temperature Range: 0 - 40 °C
Liquid Temperature during Operation: 20 °C
Density: 998.2 kg/m³
Technology:
Impeller Type: Cutting system
Main Shaft Seal: SIC/SIC
Approvals: PA-I, ATEX
Curve Tolerance: ISO9906:2012 3B2
Materials:
Pump Casing: Cast iron
EN1561 EN-GJL-200
Impeller: Cast iron
EN1561 EN-GJL-200
Installation:
Maximum Ambient Temperature: 40 °C
Maximum Operating Pressure: 6 bar
Flange Standard: DIN
Pipe Connection: DN 50
Pump Outlet: DN 50
Pressure Class: PN 10
Maximum installation depth: 7 m
Automatic Hook - up Device: 97695874
Electrical Data:
Input Power - P1: 4.9 kW
Rated Power - P2: 4 kW
Power Supply Frequency: 50 Hz
Rated Voltage: 3 x 400 - 415 V
Voltage Difference: +6/-10 %
Maximum Number of Starts per Hour: 30
Rated Current: 8 A
Starting Current: 43 A
No - load Rated Current: 3.5 A
Cos phi - Power Factor: 0.92
Cos phi - Power Factor at 3/4 Load: 0.89
Cos phi - Power Factor at 1/2 Load: 0.81
Rated Speed: 2830 r/min
Moment of Inertia: 0.011 kg m²
Motor Efficiency at Full Load: 82 %
Motor Efficiency at 3/4 Load: 82 %
Motor Efficiency at 1/2 Load: 80 %
Number of Motor Poles: 2
Starting Method: Direct-on-line starting
Enclosure Rating (IEC 34 - 5): IP68
Insulation Class (IEC 85): F
Explosion - proof: Yes
Ex-description: II 2 G EX DB IIB T4/T3 GB
Explosion Protection Standard: EN 60079-0/EN 60079-1
Cable Length: 10 m
Power Cable Type: LYNIFLEX
Cable Plug Type: No plug
Others:
Net Weight: 71.7 kg
){kind=link}