Wilo Cronoline Il E Single Stage Series Structure CNC Circulating Pump for Heating and Irrigation

• Customization: Available
• Max.Head: 80m
• Max.Capacity: 550m³/H
• Model NO.: Wilo-CronoLine-IL-E
• Driving Type: CNC
• Impeller Number: Single-Stage Pump
• Working Pressure: 13bar/16bar
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Closed
• Usage: Pump, Hot Water Heating System, Cooling Water and Cold W
• Temperature Range During Storage: -20 °c to +60 °c
• Temperature Range During Operation: 0 °c to +40 °c
• Fluid Temperature: -20 °c to +140 °c
• Insulation Level: F
• Protection Grade: IP55
• Transport Package: Wooden Chest
• Specification: Series structure
• Trademark: Wilo
• Origin: Germany
• Production Capacity: 19

Product Description

Wilo-CronoLine-IL-E is a series structure CNC dry rotor single head pump with flange connection and automatic power regulation.
Product Description                                                               
  

Wilo-CronoLine-IL-E adopts an integrated electronic power regulation device, which can save energy and is a professional device that complies with the EN 61000-3-2 standard.
Flow range  : <550m³/h
Lift range : ≤80m
Max.operating pressure at different fluid temperature : 13bar/16bar
Temperature range : -20ºC~+140ºC
Nominal diameter :DN 40 to DN 200
Aplication field :The CronoLine-IL-E series is mainly suitable for hot water heating systems, cooling water and cold water circulation circuits, industrial circulation systems, heat transfer circulation circuits, and irrigation systems

 Your advantages                                                              

• Energy savings due to integrated electronic power adjustment
• Optional interfaces for bus communication using plug-in IF-Modules
• Simple operation with Green Button Technology and display
• Integrated dual pump management
• Integrated full motor protection (PTC thermistor sensor) with trip electronics

Equipment/function

Operating modes                                                                    

• Δp-c for constant differential pressure
• Δp-v for variable differential pressure
• PID-Control
• Constant speed (n=constant)

Manual operation level                                                          

• Green button and display

• Differential pressure setpoint setting
• Setting the speed (manual control mode)
• Setting the operating mode
• Setting the pump ON/OFF
• Configuration of all operating parameters
• Fault acknowledgement

External control functions                                                    

• "Overriding Off" control input
• "External pump cycling" control input (only effective in twin-head pump operation)
• Analogue input 0 - 10 V, 0 - 20 mA for constant speed (DDC) and remote setpoint adjustment
• Analogue input 2 - 10 V, 4 - 20 mA for constant speed (DDC) and remote setpoint adjustment
• Analogue input 0 - 10 V for actual value signal from pressure sensor
• Analogue input 2 - 10 V, 0 - 20 mA, 4 - 20 mA for actual value signal from pressure sensor

Signal and display functions                                                 

• Collective fault signal SSM
• Collective run signal SBM

Data exchange                                                                        

• Infrared interface for wireless data exchange with IR-Stick
• Plug-in position for Wilo IF-Modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation

Safety functions                                                                     

• Full motor protection with integrated trip electronics
• Access disable

Dual pump management (twin-head pump or 2 x single pumps)  

• Main/standby operation (automatic fault-actuated switchover)
• Pump cycling main/standby operation after 24 hours
• Parallel operation
• Parallel operation (efficiency-optimised peak-load activation and deactivation)

Typekey                                                                       

 

Example	IL-E 50/190-11/2-R1
IL-E	In-line pump with electronic control
50	Nominal diameter DN of the pipe connection
190	Nominal impeller diameter
11	Rated power P2 in kW
2	Number of poles
R1	Version without pressure sensor

 Technical data                                                                                  

• Permissible temperature range of -20 °C to +140 °C
• Mechanical seal for pumping water up to Tmax = +140 °C. Up to T ≤ +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
• Mains connection
  • 3~440 V ±10 %, 50/60 Hz
  • 3~400 V ±10%, 50/60 Hz
  • 3~380 V -5% +10%, 50/60 Hz
• Compliance with electromagnetic compatibility without additional measures:
  • Interference emission for residential environment according to EN 61800-3:2018
  • Interference immunity for industrial environments according to EN 61800-3:2018
• Protection class IP55
• Nominal diameter DN 40 to DN 200
• Max. operating pressure 16 bar up to +120 °C, 13 bar up to +140 °C

Materials                                                                     

• Pump housing and lantern: EN-GJL-250
• Impeller
  • Standard version: EN-GJL-200
  • Special version: Bronze CuSn 10
  • Special version: Stainless steel 1.4408
• Shaft: 1.4122
• Mechanical seal: AQEGG; other mechanical seals on request

Construction                                                                     

Single-stage, low-pressure centrifugal pump in in-line design with

• Mechanical seal
• Flange connection
• Lantern
• Coupling
• Drive with integrated electronic speed control