CRNE: Corrosion Resistant
The CRNE pump is completely made of high-grade AISI 316 stainless steel. It is a high-efficiency in-line multistage pump with a built-in variable speed drive, and is suitable for industrial liquids. It is designed for systems where all components in contact with the liquid must be made of high-grade stainless steel. In industries where pumping hazardous and corrosive liquids is an essential part of daily production, safety is of utmost importance. The CRNE pumps can meet these specific challenges. They are capable of pumping corrosive, abrasive, toxic, harmful and odorous liquids.
MGE Motors Enhance Efficiency and Control
IE5 MGE motors are available, boasting market - leading energy efficiency. They can adapt to continuously changing pump speeds, enabling you to achieve comprehensive control.
High Hydraulic Efficiency
Leverage the fluid - dynamic insights from extensive simulation - driven design and validation to optimize performance.
Optimal Motor Utilization
The standard product range is optimized for the maximum utilization of motor power output.
Compact Pump Design, High - Performance Output
Smaller pumps mean lower energy requirements and operating costs.
|
 |
Technology:
Pump speed on which the pump data is based: 3555 revolutions per minute
Rated flow rate: 114 m³/h
Rated head: 23.6 meters
Pump orientation: Vertical
Shaft seal configuration: Single
Main shaft seal: HQQE
Shaft seal code: HQQE
Approvals: CE, UKCA, SEPRO
Approvals for drinking water: ACS, WRAS
Curve tolerance: ISO9906:2012 3B
Materials:
Base: Stainless steel
Base: EN 1.4408
ASTM A351 CF8M
Impeller: Stainless steel
EN 1.4401
AISI 316
Bearings: WC/WC
Support bearing: Graflon
Material certified according to: European standards
Installation:
Maximum ambient temperature: 50 °C
Maximum operating pressure: 16 bar
Maximum pressure at the specified temperature: 16 bar / 120 °C
Interface model: DIN
Inlet size: DN 100
Outlet size: DN 100
Pressure rating for pipe connection: PN 16
Flange size for motor: FF300
Electrical data:
Motor standard: IEC
Motor model: 160MH
Rated power - P2: 11 kW
Power required by the pump (P2): 11 kW
Over/undersize motor: Standard motor size
Power supply frequency: 50 / 60 Hz
Rated voltage: 3 x 380 - 500 V
Safety factor: 0.00
Rated current: 20.3 - 16.0 A
Cos phi - Power factor: 0.93 - 0.90
Rated speed: 360 - 4000 revolutions per minute
IE efficiency class: IE5
Motor full - load efficiency: 93.1 %
Encapsulation class (IEC 34 - 5): IP55
Insulation class (IEC 85): F
Motor number: 92984049
Controller:
Frequency converter: Built - in
Pressure sensor: Y
Others:
Terminal box position: 6
Minimum efficiency index, MEI ≥: 0.70
Net weight: 156 kg
Gross weight: 199 kg
Transport volume: 0.611 m³
Danish VVS No.: 385925411
Thrust handling device: N
){kind=link}