Dfw Horizontal Centrifugal Single-Stage Pump

• Customization: Available
• Max.Head: 135m
• Max.Capacity: 2160m%H
• Model NO.: DFW
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: ≤1.6MPa
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Closed
• Usage: Pump
• Maximum Working Pressure: ≤ 1.6MPa
• Flow Range: 3 ~ 2160m³/H; Head Range: 5 ~ 135m
• Motor Protection Level: IP55
• Motor Insulation Class: Class B or Class F
• Transport Package: Wooden Case
• Specification: 460mmX337mmX370mm
• Trademark: EAST
• Production Capacity: 100

Product Description

DFW Structure Diagram              

• In the DFW series horizontal centrifugal pumps, the direct connection between the motor and the pump simplifies the intermediate transmission structure. The co - axial arrangement of the pump and the motor results in low vibration and noise, enhancing the operational stability. Moreover, compared with ordinary horizontal pumps, it reduces the floor space by 30%, occupying less space.

high reliability             
 

Use of B35 - mounted Extended - Shaft Motor The DFW series horizontal centrifugal pumps use a B35 - mounted extended - shaft motor directly connected to the pump, which simplifies the intermediate transmission structure. With the pump and the motor on the same axis, it features low vibration, low noise, and smoother operation.

 

Diversity of Mechanical Seals The shaft seals of DFW series horizontal centrifugal pumps adopt mechanical seals, which have small leakage and long service life. You can choose MG1 or 120 series mechanical seals, and select the material of mechanical seals according to the application scenarios. Materials for dynamic and static rings: Graphite, silicon carbide, tungsten carbide, aluminum oxide. Materials for auxiliary sealing elements: Nitrile rubber, fluororubber, ethylene - propylene rubber, silicone rubber, fully - coated FEP, fully - coated PFA. Materials for springs and other structural components: 06Cr17Ni12Mo2Ti(G), 06Cr19Ni10 (F), Hast.C4(2.4610) (M), X2CrNiMoN22 - 5 - 3 (G1).

Reinforcing Ribs in Pump Body Design Under normal wall - thickness conditions, reinforcing ribs are designed in the pump body. This increases the strength and rigidity of the pump body. Meanwhile, it can overcome the casting deformation caused by uneven stress due to the different structural forms and varying thicknesses in different parts of the pump body. As a result, it improves the quality of casting products and enhances the overall product quality.

High - Efficiency and Energy - Saving

• The product quality of DFW series horizontal centrifugal pumps complies with the standard GB/T5657 "Technical Conditions for Centrifugal Pumps (Class II)". It keeps improving on the original basis, applying the latest achievements in hydraulic research. Through the three - dimensional design theory and model - based performance analysis methods for pumps, it maximally expands the high - efficiency area of the pump and broadens the high - efficiency range.
  The hydraulic model of the impeller is perfectly matched with the flow passage of the pump body, improving the pump's efficiency. The uniquely designed hydraulic model of the impeller significantly enhances the overall operation efficiency of the pump, ensuring reliable operation under variable working conditions.